The Hitachi Microdrive line of storage drives use the CF+ (Compact Flash Plus) interface to connect to computers. For a computer to recognize and access a CF+ drive. Filter Drivers – Removable Media as Fixed Disk. Your USB Flash Drive to make it appear as Fixed Disk. Naruto Rise Of A Ninja Pc Tpb Se more. That the Hitachi Microdrive Filter Driver method.

In this article, we’ll show you how to make a USB flash drive or an SD card to be identified in the system as a common local hard disk. You may ask why it is necessary. The matter is that by default Windows identifies all the flash drives and memory cards as removable drives that can not be split into several partitions with any of the standard Windows tools. And even if the USB flash drive is split into two or more partitions using third-party utilities (say, in Linux), only the first partition is available in Windows. Windows supports working with multiple partitions only for HDDs identified as local (i.e.

Non-removable) disks in the system. Windows recognizes a USB flash drives as removable devices due to the presence of a special bit descriptor RMB (removable media bit) on each of the devices. If the system determines that RMB=1 when polling the connected device using StorageDeviceProperty, it concludes that this device is a removable drive. Thus, to make a system see a USB flash drive as a hard disk, it’s enough to modify this descriptor. You can do this directly (which is quite risky because of the differences in the device-specific hardware implementations, and not always possible), or indirectly, by substituting the response of a USB device using a special driver, which allows to filter the information in the response of the device. • • • Connect the USB flash drive to any available port on the computer, then open the Disk Management console ( diskmgmt.msc) and make sure that it is determined by the system as Removable.